Swiftech, one of the original pioneers of water cooling, is at it again with yet another revision of their already famous water cooling kits. The kit we have in hand today is called the H20-120 Revision 3a. This is one of Swiftech's more powerful cooling systems designed for heavy duty cooling and overclocking. Could this the complete water cooling kit something you've been dreaming about? Read on and find out!

The box full of goodies...

Performance features:

High thermal dissipation is achieved with a single MCR120-FB 120 mm copper fins radiator featuring a 120x25mm fan selected for low to moderate noise (34dBA) and high back pressure.
Extreme performance at reasonable noise can also be achieved by adding a second MCR120-FB for a gain of up to 3°C.
Extreme performance MCW6000™ series water-blocks
Extreme performance MCP350™ 12 Volts DC industrial pump
1/2" OD tubing for optimum flow rate, and reasonable bulk

Convenience & reliability features:

The 12 Volt DC pump plugs directly into computer power supply, features an RPM sensor, and is fully integrated with the MCRES-1000 reservoir in a 5 1/4" CDRom tray.
High-reliability, no-maintenance MCP350 industrial pump features whisper-quiet operations thanks to brushless motor, and is rated at 50,000 hour MTBF(Mean Time Between Failures) equivalent to 5 year lifetime.
120mm slim form factor radiator fits into most chassis equipped with at least one 120mm opening for fan intake or exhaust, and can optionally be installed externally to the back of any chassis featuring at least one 60, 80 or 92mm exhaust fan, by using our patent pending MCB120 "Radbox"
Pre-installed tubing on the waterblock , and quick-connect fittings on the radiator reduce installation time.
Plug-and-play waterblock installation, doesn't require removing the motherboard (most models)
Coolsleeves™ coils completely eliminate flattening of the tubes over time, and enable users to bend soft vinyl tubing at extremely sharp radii without kinking.

Optional devices and configurations:

Add a VGA cooler such as the MCW50™
Add a chipset cooler such as the MCW20™
Add a second water block for multiprocessor applications, such as dual AMD®, dual Xeon™, or dual Opteron™.
Add a second MCR120-FB radiator for a performance gain of 3°C average at equal heat load.

Performance features:

High thermal dissipation is achieved with a single MCR120-FB 120 mm copper fins radiator featuring a 120x25mm fan selected for low to moderate noise (34dBA) and high back pressure.

Extreme performance at reasonable noise can also be achieved by adding a second MCR120-FB for a gain of up to 3°C.

Extreme performance MCW6000™ series water-blocks

Extreme performance MCP350™ 12 Volts DC industrial pump

1/2" OD tubing for optimum flow rate, and reasonable bulk

Convenience & reliability features:

The 12 Volt DC pump plugs directly into computer power supply, features an RPM sensor, and is fully integrated with the MCRES-1000 reservoir in a 5 1/4" CDRom tray.

High-reliability, no-maintenance MCP350 industrial pump features whisper-quiet operations thanks to brushless motor, and is rated at 50,000 hour MTBF(Mean Time Between Failures) equivalent to 5 year lifetime.

120mm slim form factor radiator fits into most chassis equipped with at least one 120mm opening for fan intake or exhaust, and can optionally be installed externally to the back of any chassis featuring at least one 60, 80 or 92mm exhaust fan, by using our patent pending MCB120 "Radbox"

Pre-installed tubing on the waterblock , and quick-connect fittings on the radiator reduce installation time.

Plug-and-play waterblock installation, doesn't require removing the motherboard (most models)

Coolsleeves™ coils completely eliminate flattening of the tubes over time, and enable users to bend soft vinyl tubing at extremely sharp radii without kinking.

Optional devices and configurations:

Add a VGA cooler such as the MCW50™

Add a chipset cooler such as the MCW20™

Add a second water block for multiprocessor applications, such as dual AMD®, dual Xeon™, or dual Opteron™.

Add a second MCR120-FB radiator for a performance gain of 3°C average at equal heat load.