Upon first opening the box, you are greeted with the full color manual, as well as a warning regarding the pump.

Underneath the manual is the pump unit. It is very attractively packaged, and all the parts are in labeled bags.

     There are quite a few parts once you lay them all out. Here, you can see the pump, the Thermal Control Module, the full color manual, the 120mm to 90mm converter plate, as well as several brackets for different sockets.

     Here is a close up of the Thermal Control Module (TCM). On the left side is a Molex connector, on the right are the two pump connections. On top are three fan headers, one of which gets used by the Freezone. At bottom-center, is the potentiometer that controls whether you want more performance or less noise.

A good look at what lies behind the decorative plate. Here we can see the water pump, block, and lines.

     And finally, a close up shot of the unit installed. The main unit is is held in place by only the four screws used in the case's rear fan port.