High Power Tech may be a company that many of us in North America aren't familiar with.  Most of their sales and marketing is geared toward Asia and Europe.  This doesn't mean that they are a power supply company that has just popped up and is hoping to make a name for themselves.  This company has been making high quality power supplies for over 20 years and has usually been the frontrunner with new technology and certifications.  High Power was the first company to get 80+ Gold certifications on the 1000w, 1200w and 1350w power supplies.  They were also first to get 80+ Platinum certification on their 1000w and 1200w power supplies.  This company will be bringing their new power supplies to North America soon.  Now that you know a little about High Power Tech, let's see what they sent to us today.  High Power Tech sent us the HP-1200-G14C-GOLD. This is a 1200w 80+ Gold certified power supply.  Let's take a look at it and see how it performs.

Features

80 PLUS Gold Certificated at least 90% efficiency at 50% load

Golf Surfaced- Fan Whisper quiet double ball-bearing 13.5cm golf surface fan brings more airflow volume with less noise than convention

Fan Stays On After System Off (Off-delay fan) It allows PSU fan to continue after system shut down for few seconds approximately, it helps to exhaust residual air at the end of the heating/cooling cycle for extending components lifetime.

Reliable Japan- made Solid-state Capacitors Enhance your system durability and stability even under extreme conditions

100% Reliable Japan- made Capacitors Longer lifespan than electrolytic capacitors.

All Output Cables with Nylon Sleeve Cable sleeve avoids cable clutter, allows neat and easy installation for an improved airflow.

PCI-Express Power Connectors Sufficient and stable current to fully support SLI & CrossFire Systems

Quad +12V Output Rails Ensure safe and stable system operation under heavy operation

Patented Easy Swap Connector Quick and Easy installation

Advanced Double Forward Circuit, DC to DC Technology and Double-layer PCB Comparing with Magnetic Amplifier circuitry, the working frequency of DC to DC circuitry is much higher than it has. DC to DC module uses low voltage MOS which has low on-state loss on the transferring 12v to 5v or 3.3v. 1. superior conversion efficiency 2. with higher efficiency and lower ripple output 3. to optimize the stability of CROSS and LOAD output 4. There is no compatibility issue with motherboard.

Easily Detachable and Flexible Modular Cables It allows you to use only the cables you need and enhance the air flow inside your system. Specific color connectors and infixed socket with sticker design can assist in the installation.

EuP 2010 Lot 6 Compliant

RoHS Compliant made with hazardous-free components RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.

Specifications