|
Foxconn 925XE7AA-8EKRS2
Wow, that is a long name isn't it! Irregardless, Foxconn has really impressed
us at the club with their newest offering based on the Intel 925 chipset. This
board is a fine specimen of computer hardware, and just like previous Foxconn
motherboards, has pretty much everything you could possibly want, and they also
threw in some voltage options! That's right ladies and gentlemen, Foxconn is
learning from us overclockers that test and review their stuff, and the nicest
thing about it is that we get to watch Foxconn literally evolve into a board
manufacturers capable of being reckoned with...
Foxconn 925XE7AA-8EKRS2
Processor
Intel® Pentium® 4, Socket 775, 800/1000MHz FSB
Fully supports Intel "Prescott" processors
Intel Hyper-Threading Technology supported
Chipset
Intel® 925XE Express + ICH6R
Memory
Dual channel, unbuffered, 1.8V DDR2-400/533 w/ or w/o ECC; (4) 240-pin DIMM
sockets, max 4GB
Supports Intel Performance Acceleration Technology (PAT)
Graphics
Discrete (non-integrated) - use expansion slot
Expansion Slots
1 x PCI Express x16, 3 x PCI Express x1, 3 x PCI
IDE
1 x ATA/100 + 2 x ATA/133 (w/ RAID) + 8 x SATA/150 (w/ RAID)
Audio
Integrated, 7.1 channel High Definition, including front audio and S/PDIF
headers (Realtek)
LAN
Dual integrated Gigabit Ethernet (10/100/1000) controllers, dual ports
IEEE-1394
3 via internal headers + rear cable/bracket assemby (1 x 1394b + 1 x 1394a 4-pin
+ 1 x 1394a 6-pin)
Rear Panel
1 x PS/2 keyboard
1 x PS/2 mouse
2 x RJ45 (LAN)
4 x USB 2.0
1 x line-in/line-out/mic (audio)
Additional line-out for 7.1 channel High Definition audio
1 x coax S/PDIF
1 x parallel (SPP/ECP/EPP)
1 x COM (16550-compatible UART)
1 x IEEE-1394
Internal
1 x floppy disk drive
2 x USB 2.0 headers (supports 4 ports)
2 x IEEE-1394 headers
Front audio header
1 x S/PDIF (coax out) header
BIOS
8Mb flash EEPROM w/ LAN boot, PnP, ACPI, WfM, DMI 2.0
Features
Wake-on-LAN (WOL), suspend-to-RAM (STR), suspend-to-disk (STD), SuperUtilities -
SuperBoot, SuperBIOS-Protect, SuperRecovery, SuperSpeed, SuperStep, SuperLogo,
and SuperUpdate
Accessories
Support CD, user's manual (or installation guide), rear I/O shield, 1 x floppy
drive cable, 1 x HDD/ODD drive cable (supports UDMA/ATA 33/66/100/133 drives),
RAID driver on floppy disk(s), 8 x SATA data cables, 4 x SATA power cable (each
supports 2 drives), 2 extra HDD/ODD drive cables (each supports UDMA/ATA
33/66/100/133 drives), Non-SATA drive cables are round and sheathed at the
connectors, Rear cable/bracket assembly w/ 4 x USB 2.0 ports, Rear cable/bracket
assembly,w/ 1 x coax-out, S/PDIF connector, Rear cable/bracket assembly w/ 1 x
4-pin + 1 x 6-pin IEEE-1394 connectors
Form Factor
ATX, 12.0" x 9.6" or less - see User Manual
|
